|
|
MPC Research Reports
View AllThis project discusses the performance of deteriorating double-tee (DT) girder bridges that have been in service for many years. This included field testing of two single-span DT girder bridges in South Dakota for live load distribution factors (LLDFs) and dynamic load allowance (IM). The LLDFs and IM... This report explains the various data inputs and outputs associated with the travel demand model (TDM) developed for estimating traffic volumes on low-volume roads in Wyoming. This study incorporated tourism-related data into the TDM and developed methods to estimate traffic volume on low-volume roads... The Rocky Mountain Region has experienced considerable difficulty because of alkali-silica reaction (ASR) in concrete construction. Wyoming Department of Transportation was successful in using recycled concrete aggregate (RCA) on Interstate I-80 with limited ASR damage. Reusing concrete from demolition... This report discusses the design and implementation of surcharging technology and the required laboratory, field, and engineering evaluations. It is hoped that such information will provide a more consistent and technically defensible rationale for deploying this technology on highway projects constructed... On September 11-17, 2013, Colorado suffered devastating and widespread flash flooding over 150 miles from Colorado Springs north to Fort Collins, impacting 24 counties. The flood damaged several bridges and over 400 miles of state roads. As a result of the transportation damage, residents of Drake, Colorado... Moisture-induced damage (stripping) is a major distress in asphalt pavements. This study was undertaken to evaluate the effects of chemical Warm Mix Asphalt (WMA) additives, Reclaimed Asphalt Pavement (RAP), Anti-Stripping Agent (ASA), and hydrated lime on moisture-induced damage potential of asphalt... Despite similarities to the US in terms of transportation, land use, and culture, Australia kills 5.3 people per 100,000 population on the roads each year, as compared to the US rate of 12.4. Similar trends hold when accounting for distance driven and the number of registered cars. This paper seeks to... Hydrologic analyses are used for dam safety evaluations to determine the flow a dam must pass without failing. They are also used to evaluate bridge and culvert designs. Many current guidelines model flood runoff solely by an infiltration-excess mechanism. Saturation-excess runoff and subsurface stormflow... This study presents the application of the Highway Safety Manual (HSM) to rural state highways in South Dakota and provides important guidance and empirical results regarding how to calibrate HSM models. Calibration guidelines have been developed to facilitate future calibration activities. The calibration... Longitudinal joints in Portland Cement Concrete (PCC) pavement slabs require tie (dowel) bars to control joint opening resulting from thermal stresses. Inspections of PCC pavements by the South Dakota Department of Transportation using ground penetrating radar revealed that it is common for tie bars... |
