|
|
MPC Research Reports
View AllThe motivation for this report is a proposed new microelectromechanical systems (MEMS) sensor with applications in civil infrastructure sensing. This report analyzed the influence of three assumptions employed in the Euler-Bernoulli, Rayleigh, and Timoshenko beam theories by comparing their results to... As part of a study to develop design guidelines for integral abutment bridges, a study was undertaken in which the bridge movement of the 400 South Street Bridge was surveyed for one year to quantify changes in bridge movement due to temperature variations. These quantitative bridge movements were compared... Depending on the location, highway bridges can often support considerable amounts of traffic. Due to the limitations on current earthquake forecasting techniques, a normal amount of traffic will also typically remain on a bridge when an earthquake occurs. In addition to traffic, scour effects are also... Bus Rapid Transit (BRT) is becoming one of the most popular transit services in the United States. BRT is a viable option for many cities and can offer commuters travel times comparable to those experienced in private cars. With about 100 miles of BRT service scheduled for deployment in future years... In this study, the current SDDOT Road User Cost methodology and associated unit costs were evaluated and changes were implemented to the methodology to allow for a more complete analysis that aligns with the needs of each department and their use of RUC. The methodology was used to construct a worksheet... Over the years, Fiber Reinforced Polymer (FRP) composites have gained popularity in transportation infrastructure as a material able to restore and increase the capacity of existing concrete elements. Properties such as a high strength to weight ratio, non-corrosive nature, durability, and high malleability... The purpose of this study is to provide information about railroad fuel efficiency that may be useful in evaluating transportation energy policies and assessing the sustainability of potential projects. The specific objectives are to (1) develop railroad energy efficiency models that describe differences... This report describes research performed in coordination with work at the University of Stuttgart, attempting to establish the S-N curve for fatigue loading of notched wood-concrete connections based on low/high-cycle, repeated loading tests. Experimental results are obtained on fourteen 1524 mm span... This study addresses both structural and surfacing issues associated with unpaved roads subjected to heavier traffic applications. Different gravel types with various dust suppressants including recycled asphalt pavement (RAP) and soil stabilizers were evaluated in an attempt to provide the best road... Alternatives to existing transportation truck escape ramps and crash barriers are examined using arrays of wood, bamboo, and fiberglass structural elements that act as energy absorbers as they deform. The behaviors of each material type are analyzed to determine if they have the necessary potential for... |
