Plan Notes (Design) 750 - Sidewalks and Driveways
Date |
Description |
08.03.2021 | 750-P__ PIGMENTED IMPRINTED CONCRETE: Develop a mix design using any size coarse aggregate specified in Section 802.01 C.2, "Coarse Aggregate" and with a 60-40 fine aggregate-coarse aggregate ratio.
Provide a pigment from the list below or provide an approved equal. To be considered an approved equal, pigments must meet the requirements of ASTM C 979.
- Number 366 Natural Red, produced by Soloman Colors, Inc. http://www.solomoncolors.com/ ;
- Brick Red pigment Number 160, produced by Davis Colors http://www.daviscolors.com/; or
- Brick Red, produced by Butterfield Color http://butterfieldcolor.com/
Use the same supplier for all colored concrete placed under the contract.
Add pigment at the ratio recommended by the manufacturer directly into the mixer along with the aggregate, cement, and water. Add pigment while the mixer is operating at mixing speed. Continue mixing for 5 to 10 minutes or between 50 and 100 revolutions.
Form a pattern in the concrete using a roller to create a 4 inch × 8 inch brick pattern.
Cure concrete using curing compound that meets the requirements of ASTM C 309, Type 1.
Note is set up for the item "Pigmented Imprinted Concrete", however it can be modified to cover "Pigmented Concrete" or "Imprinted Concrete" by removing the unnecessary text and changing the note title.
Revise the colors and pattern as appropriate for the project. |
|
|